DIY Folding Three-Panel Room Divider

One of the things that we needed recently was a room divider to separate the old portion of the house and the new portion of the house.  I could not find a substantial tutorial for this project, so I’m making one!

We really loved this project because there are unlimited ways to customize it to fit your style!

Ladies, I did 90% of this project by myself.  You can do it, too!

RoomDividerCover

Tools:

  • Mitre Saw
  • Table Saw (optional)
  • Drill
  • Work Table/Saw Horses
  • Pocket Hole Jig (we used Kreg jig)
  • Clamps
  • Sander & Sandpaper (optional)

Materials:

  • 2-1/2″ Coarse Pocket Hole screws
  • 7 8′ 2×3 boards
  • Stain/Polyurethane OR Paint
  • Wood Filler
  • Either lattice wood or 2×6 ripped into thin strips (to cover staples)
  • Inexpensive drapes/fabric (we used VIVAN sheers from IKEA) or whatever center material you desire
  • 4 Hinges

Aaron and I knew we’d be moving this room divider around fairly often, so we chose a lighter material for the center (fabric).  It adds privacy but still lets light through.  If we were going to leave this partition up permanently, we may have chosen another center material such as decorative wood or cool old metal.

To begin construction, I cut 6 13″ boards.  These will be your horizontal supports.  If you don’t have a mitre saw, this can easily be done with a circular saw or hand saw.  I sanded the edges a bit for a more “polished” look. DSC_0429 Next, I used our Kreg Jig pocket hole kit to drill pocket holes to attach the horizontal boards to our vertical boards. I screwed the 2-1/2″ coarse screws in just enough to hold (but not enough to poke through the end of the board). DSC_0433DSC_0434DSC_0435 At this point, I used the mitre saw to cut our vertical boards.  We wanted our room divider to be 7′ tall, so we cut the six remaining 8′ boards to 7′.  Again, I sanded the vertical boards for a more “polished” look.

I assembled the first panel on the saw horses by clamping the seams. I chose to do the top first. Since we already pre-drilled our screws, it is easy to just use your screwdriver to screw the 13″ (horizontal) board and the 7′ (vertical) boards together. DSC_0437DSC_0438When I arranged the bottom 13″ board, I placed it about 3″ from the bottom of the vertical board so we’d have “feet”. After the seams are clamped, screw them together (just like you did on the top)! DSC_0439Repeat for each of the three panels.  Fill your pocket holes with wood filler and let dry completely. Once all three are assembled, install your hinges. [I forgot to take photos]. The easiest way I can describe how to install the hinges is to (a) choose your center panel, (b) install hinges on one side with the pins facing forward, then (c) install hinges on the opposite side with the pins facing backward. You’ll be left with something that looks like this:

DSC_0441

I then stained and sealed the wood. I chose to remove the hinges for this part, but you don’t have to.

DSC_0524

Once the sealant was dry, I used my heavy-duty stapler to staple the IKEA sheer curtains into the wood.

DSC_0527

After everything was stapled, I trimmed the excess. I wasn’t concerned about the look of my trimming because I knew I’d be covering the staples up with a thin strip of wood.

DSC_0528

At this point, we priced out lattice wood (or thin strips of wood) to hide the staples.  We were flabbergasted at how expensive it was going to be (like… more than the frame wood and curtains put together).  We had a 2×6 in the “wood pile”, so we ripped 1/4″ thick pieces on the table saw, then stained and sealed them to match.  Detailed photos of the finished product are below.

So, after all of that work, here is the finished product:   DSC_0550DSC_0553DSC_0547DSC_0558DSC_0559

We think the DIY Folding Three-Panel Room Divider turned out pretty well. After all, you’ll never know if there are dirty dishes lurking in the sink. 😉

Thanks for stopping by!

Kitchen with Personality & Sources

In late January (where has the time gone?!?), we shared our kitchen tour and I promised you guys some kitchen sources in case you’re renovating, building, or just flat out curious.

Since our kitchen tour, we’ve added some finishes that make the kitchen a bit less bland, so here are some “update photos” followed by the sources!

DSC_0489

DSC_0295

Shelving with raw steel brackets and brass screws (see sources below).  Each item on these shelves has a story or memory that is special to us!

DSC_0340

I’ve always told Aaron I wanted an old truck…

DSC_0362

My sister brought this adorable cow for coffee creamer back from Italy.  Isn’t she cute?

DSC_0477

DSC_0485

Here are our sources if anyone is curious:

Floors:  US Floors Cork in Coffee Matte ordered from Regal Floors

  • We got an absolutely unbeatable price from this company, but make sure you leave plenty of time for back-ordered product (especially cork)

Cabinets:  Pepper Shaker Cabinets from Cabinet Giant

  • FYI:  A coupon code saved us over $600
  • Cabinets are plywood base and real wood fronts (no MDF)
  • Make sure you read about shipping- we had to rent a moving truck- but savings were worth it!

Viking Stove: Craigslist- $500- not kidding

Refrigerator:  Stainless-look Frigidaire that we already owned

Vent Hood:  ProLine Range Hoods 36″ 696 Professional Range Hood

  • Prices are unbeatable.  Customer service reviews are great.
  • We had a burnt out light-bulb upon arrival and they sent us new ones for free

Dishwasher:  Whirlpool Gold Top Control Dishwasher in White Ice from Home Depot

Countertops:  Quartz in Pure White cut by a local stone cutter

Island:  Old Work Table and Stool found at Lula B’s in Dallas

Chandelier:  Lamps Plus

  • First chandelier we received had an electrical short, but they sent us a new chandelier

Sink:  IKEA Farmhouse Sink (which I’ve told is being replaced with a newer model)

Faucet:  Bainbridge Single Hole Pull-Down Faucet in Polished Brass from Signature Hardware

  • I accidentally ordered the wrong size faucet and, in a pinch, had this faucet overnighted.  It arrived at my door in about 12 hours.  Not exaggerating.
  • In addition to that, they waived the re-stocking fees since it was an exchange and not a return
  • Prices are unbeatable for the quality you receive

Undercabinet Lights:  Supplied by Electrician

Shelf Brackets:  Raw Steel by Designs2Create on Etsy

Reclaimed Wood for Shelving:  From our house and our neighbor’s house

Cabinet Hardware:  Lee Valley Hardware

I don’t really like to talk “numbers”, but including the price of the appliances, we came in just under $8,500 for our entire kitchen.  I’d say that is a reasonable cost for a “kitchen from scratch.”

Any questions?  Please don’t hesitate to ask!